Smart Lighting Control Module ASL100-P640/30

● Model: ASL100-P640/30

● Intelligent lighting control management device

● Power supply for KNX/EIB system

● Input: AC 85~265V; Output: DC30V, 640mA

● Overload protection

Product Detail:

General

ASL100-P640/30 bus power module (hereinafter referred to as power supply) is a bus power supply based on Acrel-bus intelligent control system. All control modules on the bus are coupled with the power supply by the choker in the power supply.

The bus is connected by the standard EIB wiring terminal and standard KNX bus. After the reset key on the module is pressed, the power supply will be reset for 20s (the bus power supply is disconnected and the auxiliary power supply normally provides the power supply during reset period) and the bus and power supply are disconnected physically. If the power supply needs to be cut off for more than 20s during use, the power line needs to be cut off.

This model of module is also attached with a 30V DC auxiliary output power supply. This auxiliary power supply may power on the external power module, such as IP module and touch screen and so on.

Specification:

ASL100-P640/30:

A standard power supply for the KNX/EIB system, coupling bus signals and monitoring overcurrent in KNX/EIB system.

Power supply, input: 85~265AC, output: DC30V, 640mA, overload protection.

ASL100-S2/16: Switch driver, 2 circuits control.(Max. current: 16A per circuit)

ASL100-S4/16: Switch driver, 4 circuits control.(Max. current: 16A per circuit)

ASL100-S8/16: Switch driver, 8 circuits control.(Max. current: 16A per circuit)

ASL100-S12/16: Switch driver, 12 circuits control.(Max. current: 16A per circuit)